The Glendinning RV-Cablemaster was developed to automatically extend, retract, and store your RV's power cable. The RV-Cablemaster has been widely used by RV manufacturers as an option for customers who are tired of dealing with that back breaking chore.
- Eliminates heavy lifting - the RV-Cablemaster significantly reduces the effort required to extend, retract, and store your 50 amp power cable with powered extension and retraction.
- No slip rings or brushes - unlike industrial reels, our system does not carry power through slip rings or brushes, which may be susceptible to moisture and corrosion in the outdoors environment. There is no chance of poor electrical connections creating a "hot spot", low voltage, or possible fire hazard because the power cable is hard-wired into the RV.
- Unlimited storage capacity - the RV-Cablemaster can handle any length of cable and is limited only by the amount of cable storage area provided within your RV.
- Relocate power cable storage - allows you to store the power cable in storage areas otherwise inaccessible, freeing up valuable storage space for other uses.
There are 2 different models to choose from:
- RVCM-4 Cablemaster for 30amp RV power cable
- RVCM-7 Cablemaster for 50 amp RV power cable
|
SALES LITERATURE
RV-Cablemaster Brochure - 121kb DIMENSIONAL DRAWINGS RVCM-4 Dimensions - 113kb TECHNICAL INFORMATION RV-Cablemaster Manual - 516kb Click here for an archive of our downloadable documents by product line... |
NOTE: When installed properly, each RV-Cablemaster unit will extend and retract your RV power cable and store it in the storage area that the installer has designated. The RV-Cablemaster does not require any storage container - the power cable can "free-fall" into any void space that can handle the amount of cable. Typically the RV-Cablemaster can handle up to 75 ft. of power cable. Optional storage containers are available through Glendinning to aid in the asthetic look of your storage area.
