Home   Marine Grade Products
CablemastersCablemasters Engine ControlsEngine Controls Control CablesControl Cables HosemasterHosemasters SynchronizerSynchronizer
CM-4 CM-4
  • Typical Current: 30 amp (USA) 32 amp (EU)
  • Cable Type: #10 AWG x 3
  • Cable Diameter: 0.5" (12mm) to 0.8" (21mm)
  • Input Voltage: 12 or 24 volt
  • Industries: Marine, Industrial
CM-7 CM-7
  • Typical Current: 50 amp (USA) 63 amp (EU)
  • Cable Type: #6 AWG x 4
  • Cable Diameter: 0.8" (21mm) to 1.4" (29mm)
  • Input Voltage: 12 or 24 volt
  • Industries: Marine, Industrial, RV
CM-8 CM-8
  • Typical Current: 100 amp (USA) 125 amp (EU)
  • Cable Type: #2 AWG x 4
  • Cable Diameter: 1.2" (29mm) to 1.6" (42mm)
  • Input Voltage: 24 volt
  • Industries: Industrial, Marine
CM-9 CM-9
  • Typical Current: 125+ amp
  • Cable Type: #0 AWG x 4
  • Cable Diameter: 1.6" (42mm) to 2.75" (70mm)
  • Input Voltage: 24 volt
  • Industries: Marine, Industrial
CRM-30 CRM-30
  • Typical Current: 30 amp (USA) 32 amp (EU)
  • Cable Type: #10 AWG x 3
  • Cable Length: 50 feet
  • Input Voltage: 12 or 24 volt
  • Industries: Marine, Industrial
CRM-50 CRM-50
  • Typical Current: 50 amp (USA)
  • Cable Type: #6 AWG x 3
  • Cable Length: 50 feet
  • Input Voltage: 12 or 24 volt
  • Industries: Marine, Industrial
EEC-3 Control Head EEC-3
  • Engine Type: Electronic
  • Troll Mode: Yes
EEC-4 Control Head EEC-4
  • Engine Type: Electronic
  • Troll Mode: No
Model S Model S
  • Hose Length: 8, 16 or 20 feet
  • Hose - Inner Diameter: 1/3 inch
  • Max Pressure (PSI): 100 PSI
  • Power Source: Spring Powered
Model M Model M
  • Hose Length: 35 or 50 feet
  • Hose - Inner Diameter: 1/2 or 5/8 inch
  • Max Pressure (PSI): 3000 PSI
  • Power Source: 12 or 24 volt motor
Model LW Model LW
  • Hose Length: 50, 75 or 100 feet
  • Hose - Inner Diameter: 1/2 or 5/8 inch
  • Max Pressure (PSI): 3000 PSI
  • Power Source: 12 or 24 volt motor
Smart Actuator Control Head Smart Actuator
  • Engine Type: Mechanical
  • Backup System: Optional
  • Trim Control : No
  • Outboard Engines: No
Smart Actuator II Control Head Smart Actuator II
  • Engine Type: Mechanical
  • Backup System: No
  • Trim Control : Optional
  • Outboard Engines: Yes
Pro-X 32B Pro-X 32B
  • Stroke Length: 2 inch
  • Threading: #10-32
  • End Fittings: Bulkhead / Bulkhead
  • Core Type: Armored (0.102 inch)
Pro-X 33C Pro-X 33C
  • Stroke Length: 3 inch
  • Threading: #10-32
  • End Fittings: Clamp / Clamp
  • Core Type: Armored (0.102 inch)
Pro-X 33C - Mercury Pro-X 33C - Mercury
  • Stroke Length: 3 inch
  • Threading: #10-32
  • End Fittings: Clamp / Clamp
  • Core Type: Armored (0.102 inch)
Pro-X 43C Pro-X 43C
  • Stroke Length: 3 inch
  • Threading: 1/4"-28
  • End Fittings: Clamp / Clamp
  • Core Type: Armored (0.125 inch)
Pro-X 43BC Pro-X 43BC
  • Stroke Length: 3 inch
  • Threading: 1/4"-28
  • End Fittings: Clamp / Bulkhead
  • Core Type: Armored (0.125 inch)
Pro-X 64C Pro-X 64C
  • Stroke Length: 4 inch
  • Threading: 5/16"-24
  • End Fittings: Clamp / Clamp
  • Core Type: Armored (0.187 inch)
Pro-X 64BC Pro-X 64BC
  • Stroke Length: 4 inch
  • Threading: 5/16"-24
  • End Fittings: Clamp / Bulkhead
  • Core Type: Armored (0.187 inch)
Pro-X Evinrude / Johnson Pro-X Evinrude / Johnson
  • Stroke Length: 3 inch
  • Threading: Evinrude / Johnson
  • End Fittings: Evinrude / Johnson
  • Core Type: Armored (0.102 inch)
Synchronizer Synchronizer
  • Engine Compatibility: All
  • Hydraulic Controls: Supported
  • Pneumatic Controls: Supported
  • Electronic Controls: Supported
Copyright © 1992-2013 Glendinning Products, LLC. All rights reserved.